Rohde & Schwarz 1323.0012.03, User Manual

Page: 755 / 1014

Command Reference
R&S
®
ZNL/ZNLE
755 User Manual 1178.5966.02 ─ 07
Parameters:
<UppEdge> Lower or upper edge of the zoom window. Range and unit
depend on the measured quantity, see
"Units for DISPlay... com-
mands" on page 738.
Default unit: NN
<TraceName> Optional string parameter for the trace name, e.g. 'Trc4'. If this
optional parameter is present, both numeric suffixes are ignored
(trace names must be unique across different channels and win-
dows).
Example: See
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM[:
STATe]
Manual operation: See "Max / Min / Start / Stop" on page 299
DISPlay:ANNotation:CHANnel[:STATe] <Boolean>
DISPlay:ANNotation:TRACe[:STATe] <Boolean>
Shows or hides the channel/trace list(s) in all diagrams of the current channel setup.
Parameters:
<Boolean> ON | OFF - show or hide information element(s).
*RST:
ON
Example: *RST; :DISP:ANN:TRAC OFF; CHAN ON; FREQ OFF
Create diagram area no. 1 (with default trace) and hide the trace
list. Keep the channel list but hide the swept frequency range.
Manual operation: See "Trace Info" on page 396
DISPlay:ANNotation:FREQuency[:STATe] <Boolean>
Unmasks or masks all stimulus values in the VNA GUI for the active channel setup.
Parameters:
<Boolean> ON | OFF - unmask or mask stimulus values
*RST:
ON - all stimulus values unmasked
Example: *RST; :DISP:ANN:FREQ OFF
Create diagram area no. 1 (with default trace) and mask all stim-
ulus values.
Manual operation: See "Hide Sensitive Information" on page 395
DISPlay:LAYout <LayoutMode>
Arranges the diagrams in the screen, leaving the diagram contents unchanged.
Parameters:
<LayoutMode> LINeup | STACk | HORizontal | VERTical | GRID
LINeup
–
the diagrams are arranged side by side.
STACk
–
the diagrams are arranged one on top of the other.
VNA Command Reference
www.allice.de Allice Messtechnik GmbH