Rohde & Schwarz 1323.0012.03, User Manual

Page: 675 / 1014

Command Reference
R&S
®
ZNL/ZNLE
675 User Manual 1178.5966.02 ─ 07
CALCulate<Chn>:TRANsform:TIME:STIMulus <Type>
Selects the type of stimulus to be simulated in the low pass transformation process.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Type> IMPulse | STEP
IMPulse - impulse response, in bandpass or lowpass mode.
STEP - step response, only in lowpass mode (a bandpass mode
setting
CALCulate<Chn>:TRANsform:TIME[:TYPE] BPASs
is automatically changed to lowpass).
*RST:
IMP
Example: See
CALCulate<Chn>:TRANsform:TIME[:TYPE]
Manual operation: See "Type" on page 336
CALCulate<Chn>:TRANsform:TIME:STOP <StopTime>
Defines the stop time of the diagram in time domain.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<StopTime> Stop time of the diagram.
Range:
-99.999999999998 s to +100 s.
Increment: 0.1 ns
*RST:
+4E-009 s
Default unit: s
Example: See
CALCulate<Chn>:TRANsform:TIME:STARt
Manual operation: See "Time Start / Time Stop / Time Center / Time Span"
on page 292
Note: If the x-axis is scaled in distance units (
CALCulate<Chn>:TRANsform:TIME:
XAXis DISTance
), then the stop value is entered in m; the range and default value
changes accordingly.
CALCulate<Chn>:TRANsform:TIME:WINDow <WindowType>
Selects the window type for filtering the data in the frequency domain prior to the time
domain transformation.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<WindowType> RECT | HAMMing | HANNing | BOHMan | DCHebyshev
RECT - no profiling (rectangle)
VNA Command Reference
www.allice.de Allice Messtechnik GmbH