Rohde & Schwarz 1323.0012.03, User Manual

Page: 101 / 1014

Common Instrument Functions
R&S
®
ZNL/ZNLE
101 User Manual 1178.5966.02 ─ 07
See Chapter 7.2.2, "Storing and Recalling Instrument Settings and Measurement
Data" , on page 102.
●
Hardcopy functions can be easily accessed via the [Print] system key.
See
Chapter 7.2.3, "Creating Screenshots of Current Measurement Results and
Settings" , on page 111.
●
Trace import and export functions can be accessed via [File] > "Export" | "Import".
In VNA mode this opens the "Trace" > "Trace Data" softtool tab, from where you
can control the trace export or import. See
Chapter 9.6.11, "Trace Data Tab" ,
on page 357.
●
Other advanced data management functions, such as the export and import of
sweep segments or limit lines, can be accessed via related softtools and dialogs.
● Restoring the Default Instrument Configuration (Preset) ...................................... 101
● Storing and Recalling Instrument Settings and Measurement Data ..................... 102
● Creating Screenshots of Current Measurement Results and Settings .................. 111
7.2.1 Restoring the Default Instrument Configuration (Preset)
When delivered, the R&S ZNL/ZNLE has a default configuration. You can restore this
defined initial state at any time as a known starting point for measurements. This is
often recommendable as a first step in troubleshooting when unusual measurement
results arise.
Factory default configuration
The factory default configuration is selected such that the RF input is always protected
against overload, provided that the applied signal levels are in the allowed range for
the instrument.
Alternatively to the factory default settings, you can define user-specific recall settings
to be restored after a preset or reboot, see
"To recall settings automatically after preset
or reboot" on page 110.
To restore the default instrument configuration for all channel setups at once
► Press the [PRESET] key.
After you use the [PRESET] function, the history of previous actions is deleted, i.e. any
actions performed previously cannot be undone or redone using the [UNDO/REDO]
keys.
Remote command:
*RST
or
SYSTem:PRESet
Data Management
www.allice.de Allice Messtechnik GmbH