manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 80

Getting Started

R&S

®

 ZNL/ZNLE

80

User Manual 1178.5966.02 ─ 07

5.4.2.3

 

Context Menus

Several items in the diagram area have context menus (for example markers, traces or
the channel bar). If you right-click on one of these items (or tap it for about 1 second), a
menu is displayed which contains the same functions as the corresponding softkey.
This is useful, for example, when the softkey display is hidden.

5.4.2.4

 

On-screen Keyboard

The on-screen keyboard is an additional means of interacting with the instrument with-
out having to connect an external keyboard.

The on-screen keyboard display can be switched on and off as desired using the "On-
Screen Keyboard" function key beneath the screen.

Operating the Instrument

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands