VNA GUI Reference
R&S
®
ZNL/ZNLE
482
User Manual 1178.5966.02 ─ 07
Note:
The loaded S-parameters are stored in the active channel setup. Persisted
channel setups contain the full embedding and deembedding data so that they can be
transferred to other instruments.
Remote command:
MMEMory:LOAD:VNETworks<Ch>:BALanced:DEEMbedding<LogPt>
MMEMory:LOAD:VNETworks<Ch>:BALanced:EMBedding<LogPt>
Balanced Ports
that allows you to modify the balanced
port configuration.
9.14.1.6
Ground Loop Panel
Allows you to activate or deactivate ground loop deembedding/embedding ("Active").
Access:
> "Ground Loop"
For the "1-Port Data" network type, the required touchstone file can also be selected
from here ("...").
This panel can also be activated by selecting the
to its description for background information, parameters and additional remote com-
mands.
Active
The checkboxes in the "Active" column activate or deactivate the configured ground
loop deembedding/embedding (i.e. adds or removes it to/from the calculation flow)
without changing its parameters.
Remote command:
CALCulate<Ch>:TRANsform:VNETworks:GLOop:DEEMbedding[:STATe]
CALCulate<Ch>:TRANsform:VNETworks:GLOop:EMBedding[:STATe]
File Name 1
The ellipsis button in the "File Name 1" column is enabled if a 1-port data
work (
*.s1p
file) is selected.
Offset Embed Softtool
www.allice.de
Allice Messtechnik GmbH
