Rohde & Schwarz 1323.0012.03, User Manual

Page: 788 / 1014

Command Reference
R&S
®
ZNL/ZNLE
788 User Manual 1178.5966.02 ─ 07
Example: See
MMEMory:LOAD:CORRection
Usage: Setting only
Manual operation: See "Add / Add All... / Replace / Apply / Apply to All"
on page 467
MMEMory:STORe:LIMit <TraceName>, <LimLineFile>
Saves the limit lines associated to a specified trace to a limit line file. Limit lines are
created using the
CALCulate<Chn>:LIMit...
commands.
Setting parameters:
<TraceName> Name of an existing trace in the active channel setup (string
parameter) for which a limit line definition exists.
<LimLineFile> String parameter to specify the name and directory of the cre-
ated limit line file. The default extension (manual control) for limit
line files is *.limit, although other extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
MMEMory:CDIRectory ?
Example: See
MMEMory:LOAD:LIMit
Usage: Setting only
Manual operation: See "Recall... / Save..." on page 404
MMEMory:STORe:MARKer <AsciiFile>
Saves the values of all markers to an ASCII file.
Setting parameters:
<AsciiFile> String parameter to specify the name and directory of the cre-
ated ASCII file. The default extension (manual control) for
marker files is *.txt, although other extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
MMEMory:CDIRectory ?
Example: *RST
Reset the analyzer, creating the default trace no. 1 in channel
no. 1.
CALC:MARK ON; MARK:X 1GHz
Create marker no. 1 and place it to 1 GHz.
CALC:MARK2 ON; MARK2:X 2GHz
Create a second marker and place it to 2 GHz.
MMEM:STOR:MARK 'Marker.txt'
Store the marker values to an ASCII file. The file contains both
marker values, e.g.:
Trc1 S21
Mkr 1 1.000000 GHz -4.900 dB
Mkr 2 2.000000 GHz -6.807 dB
Usage: Setting only
VNA Command Reference
www.allice.de Allice Messtechnik GmbH