Rohde & Schwarz 1323.0012.03, User Manual

Page: 890 / 1014

Command Reference
R&S
®
ZNL/ZNLE
890 User Manual 1178.5966.02 ─ 07
Setting parameters:
<Scope> ALL
If
ALL
is specified, all logical ports are dissolved; the <log_port>
suffix is ignored. If
ALL
is omitted, only the specified balanced
port is dissolved.
Example: See
SOURce<Ch>:LPORt<LogPt>
Usage: Setting only
Manual operation: See "Select Predefined Port" on page 368
SOURce:GROup...
The
SOURce:GROup...
commands define the group of (un-)used logical ports.
SOURce<Ch>:GROup<Grp>
.......................................................................................... 890
SOURce<Ch>:GROup<Grp>:CLEar
................................................................................ 890
SOURce<Ch>:GROup<Grp>:PORTs
............................................................................... 891
SOURce<Ch>:GROup<Grp> <arg0>, <arg1>
In "set direction" this command defines the set of active logical ports (the "master
group") as the continuous range from
<log_port1>
to
<log_port2>
, i.e. logical
ports outside this range are disabled.
In "get direction" it returns the minimum and maximum enabled logical port.
See
SOURce<Ch>:LPORt<LogPt>
on how to define logical ports.
Suffix:
<Ch>
.
Channel number.
<Grp> Port group number, must be 1 (or omitted).
Parameters:
<arg0>
<arg1> First and last logical port number in the port group. Must be
omitted if the command is used as a query.
Example: See
SOURce<Ch>:LPORt<LogPt>
on page 888
SOURce<Ch>:GROup<Grp>:CLEar [<arg0>]
Dissolves the "master port group", i.e. reenables all logical ports.
Suffix:
<Ch>
.
Channel number.
<Grp> Port group number.
This suffix is ignored: only <Grp>=1 is supported.
VNA Command Reference
www.allice.de Allice Messtechnik GmbH