Avaya MCC1, Установка и обновления

Страница: 713 / 874

Install and Connect Modems
Task List: Set up Modem Pooling
SI Installation and Upgrades 713
June 2004
Set the Modem Connected to Data Module
Return to Task List
1
Type add data-module next and press Enter.
2
Type pdm in the
Type
field.
3
Type x in the
Port
field.
4
Type
dte
in the
Connected to
field and press Enter.
5
Type add station next and press Enter.
6
Type 2500 in the
Type
field.
7
Type x in the
Port
field.
8
Type n in the
Tests
field and press Enter.
9
Type add modem-pool next and press Enter.
10
Type combined in the
Group Type
field.
11
Type 5 in the
Hold Time (min)
field.
12
Type two-way in the
Direction
field.
13
Type 9600 in the
Speed
field.
14
Type Full in the
Duplex
field.
15
Type async in the
Synchronization
field.
16
Type the port pair assignments in the
Analog
and
Digital
fields and press Enter.
Return to Task List
Set the Modem Connected to the Data
Terminal Equipment (DTE)
Return to Task List
1
Type add station next and press Enter.
2
Type 2500 in the
Type
field.
3
Type the port assignment in the
Port
field and press Enter.
Set 7400A and 7400B Options (Modem
Pooling)
Return to Task List
Determine if the 7400A or 7400B will be interfacing with D-lead modems or attention control modems.
Use
Table 28, Options for D-Lead and Attention Control Modems, on page 714 to interface with either
modem. You can set options for the 7400B through a dumb terminal.