Avaya MCC1, Установка и обновления

Страница: 455 / 874

Bring the System Online
Task List: Make Data Module Settings
SI Installation and Upgrades 455
June 2004
Return to Task List
Connect Remotely to the Avaya Media Gateway Through a Data Module
Return to Task List
If the PC is more than 50 ft (15 m) from the Avaya Media Gateway, you can connect it through a data
module.
1
Connect the equipment as shown in Figure 168, A typical remote connection using an 8400B
(top) or 7400B (bottom) data module, on page 456 .
NOTE:
With a 7400A or 7400B+ data module, use a 4-wire digital line circuit pack. With the
8400B+ data module, use a 2-wire digital line circuit pack.
In place of a 7400B+ data module, you can use a 7400A data module. If you do, see Set
the Data Module to DCE Mode on page 458 .
2
Wire the digital line circuit pack to the wall jack as follows:
— For a 7400B+, wire to the second and third pair of the wall jack.
— For an 8400B+, wire to the first pair of the wall jack.
After connecting the data module, check the Set the Data Module to DCE Mode on page 458 and perform
any necessary tasks.
Return to Task List
PC connections by platform
Reliability r si csi
Standard Terminal Active TERM TERM
High/Critical — DOT —