Avaya MCC1, Установка и обновления

Страница: 734 / 874

Test Telephones and Other Equipment
Playback Announcement
734 SI Installation and Upgrades
June 2004
Playback Announcement
Return to Task List
1
Dial access code followed by the integrated announcement extension number. Dial tone is heard.
2
Dial “2.” The announcement is heard and dial tone is heard at completion of announcement.
Delete Announcement
Return to Task List
1
Dial access code followed by the integrated announcement extension number. Dial tone is heard.
2
Dial “3.” A confirmation tone is heard and announcement is deleted.
Test Music-on-Hold
Return to Task List
Verify music is provided to a held party during any hold interval.
Test Emergency Transfer
Return to Task List
Put system in emergency transfer mode and make call using emergency transfer telephone. There may be
up to 4 Emergency Transfer switches depending on the system configuration. The switch is located on the
Processor circuit pack(s) in the Processor Port Network (PPN) Control Carrier.
Test Remote Access Interface
Return to Task List
Test the communication link between the system and the remote interface (formerly INADS) and verify
the alarm notification process. Make a remote test from the remote interface to the Avaya Media Gateway
and a local test from the Avaya Media Gateway to the remote interface.
In some countries, this remote access interface is not allowed. Contact your Avaya representative.