Avaya MCC1, Установка и обновления

Страница: 608 / 874

Add IP Solutions
Task List: Install TN2302AP
608 SI Installation and Upgrades
June 2004
3
On page 2, type in the node names and IP addresses for the TN799x and the TN2302AP.
NOTE:
The customer or design team provides the actual name and address. Suggest a generic
name and not one tied to the circuit pack.
4
Type display circuit-pack and press Enter. Verify that the TN2302AP shows up in the
Code
column.
5
Type
change ip-interfaces
and press Enter. See Figure 237, IP Interfaces screen, on page 609
NOTE:
The customer provides the IP address, subnet mask, and gateway address.
6
Type in the following information for the TN2302AP IP Media Processor and TN799x C-LAN:
— Set Slot field to UUCSS.
— The
Code
and
SFX
fields are automatically populated with TN799x and TN2302AP.
— In the Node Name field type the same node name entered on the Node Name screen.
— In the
Subnet Mask
field use the default setting unless you are given a different subnet
mask.
— In the
Gateway Address
field use the address you are given or leave blank.
— Set the
Net Region
field to 1 unless you are given a different number.
— Set the Enable Eth Pt field to y
7
Press Enter to save the information and effect the new settings.
Refer to the Administration for Network Connectivity for Avaya™ Communication Manager (555-233-
504) for more information on these administration steps and for the steps to administer IP Softphones and
H.323 trunks.
NOTE:
The administration of the TN2302AP is the same as that for the TN802B.