Avaya MCC1, Установка и обновления

Страница: 483 / 874

Test the System
Task List: Test the System
SI Installation and Upgrades 483
June 2004
Test the System
This section provides tests to:
•
review the status of the system
•
test the tone-clock, TDM bus, and duplication link in the Processor Port Network (PPN)
•
test the expansion interfaces, tone-clock(s), TDM buses, and duplication in the Expansion Port
Networks (EPNs).
These tests verify the Time Division Multiplexing (TDM) cables, terminators, and the Inter-Cabinet
Cables (ICC). If a FAIL Result code is seen or other problems are indicated, check these cables. If
problems persist, refer to the Maintenance for Avaya DEFINITY® Server SI (555-233-123)
documentation.
See LED Indicators on page 484 for information regarding the LED status indicators for the different
circuit packs.
NOTE:
Circuit pack positions are usually given by cabinet, carrier, and slot. They may also be
given by port. The term “cabinet” refers either to a stack of SCC1 (Single-Carrier
Cabinets) or to an MCC1 (Multi-Carrier Cabinet) making up one port network. A port
network is defined as a group of cabinets connected together with one TDM bus.
Task List: Test the System
CAUTION:
To prevent unnecessary trouble tickets, do not enable the system alarms (Alarm
Origination feature) until all installation and administration procedures are completed.
1
Check System Status for Each Cabinet on page 487
2
Check Circuit Pack Configuration on page 489
3
Test Time Division Multiplexing Bus in Processor Port Network on page 490
4
Test Tone-Clock Boards on page 491
5
Test SPE Duplication Memory Shadowing Link (if duplicated) on page 492
6
Test Duplicated Switch Processing Element Interchange (if duplicated) on page 492
7
Test Time Division Multiplexing Bus for Each Expansion Port Network on page 494
8
Test Tone-Clock for Each Expansion Port Network on page 495
9
Test Tone-Clock Interchange for Each Expansion Port Network on page 495
10
Test Expansion Interface Exchange for Each Expansion Port Network on page 495
11
Check Circuit Pack Configuration on page 497
12
Save Translations, if Required on page 497