Avaya MCC1, Установка и обновления

Страница: 702 / 874

Install and Connect Modems
Task List: Install and Connect Modems
702 SI Installation and Upgrades
June 2004
Figure 284: Network Jack on U.S. Robotics Modem
Return to Task List
Set External Modem Options
Return to Task List
A locally obtained, type-approved external modem may be used. Contact your Avaya representative for
information.
1
Set the modem switches:
•
If a U.S. Robotics Model 839 modem is installed, refer to U.S. Robotics Model 839 External
Modem Switch Settings on page 703 to set the 8 option switches on the U.S. Robotics modem.
•
If any other modem is installed, refer to the setup instructions provided with that modem. Refer to
SCC1 Modem Fields on page 703 while setting up the modem.
2
At the management terminal, enter
change system-parameters maintenance
and press Enter.
3
Scroll to page 3 of the form. Set the
Modem Connection:
field to external if a modem is
installed. Set the field to none if no modem is installed.
NOTE:
This field must be administered or alarms will be generated. The Modem Connection:
field cannot be set to none if Alarm Origination is activated.
4
Set the Data Bits: field to 8 (default).
5
Set the
Parity:
field to none (default).
6
For non-United States installations, set the remaining modem fields as shown in SCC1 Modem
Fields on page 703.
Figure notes
1 Pin 1 of network jack 2 Modem
modmcabl KLC 110397
OF
F
O
N
A
A
C
D
R
D
SD
C
S
AR
Q
/F
A
X
TR
Spo
rt
s
te
r
33
.6
F
axm
od
e
m
1
2