Avaya MCC1, Установка и обновления

Страница: 576 / 874

Install Additional Hardware
BRI Terminating Resistor Installation
576 SI Installation and Upgrades
June 2004
Basic Multipoint Installation Distances
Figure 230, Basic Multipoint with One Work Location, on page 576 provides cabling information for
fanout of ISDN-BRI multipoint installations. In this illustration, the terminating resistor is located in the
satellite closet. All distances assume 24 AWG (#5) (0.5 mm
2
) D-Inside Wire (DIW).
Figure 230: Basic Multipoint with One Work Location
Add Circuit Packs (ISDN BRI)
Return to Task List
1
Determine port assignments of circuit packs to be added.
2
Install the appropriate circuit packs in assigned cabinet slot (as required).
Required circuit packs:
— TN2401 Processor circuit pack
— TN556D or TN2198 ISDN BRI line circuit pack.
— TN570D Expansion Interface circuit pack (if EPN present)
Return to Task List
Figure notes
1 S-Interface Source (TN556D)
2 Terminating Resistor
3 Satellite Closet
4 Maximum Distance from S-Interface Source
to Work Location (1600 Feet) (488 m)
5 Maximum Distance From Terminating
Resistor to Work Location (250 Feet) (76 m)
6 System Cabinet
7 Terminating Endpoint 1
8 Terminating Endpoint 2
9 Work Location
10 Maximum Distance from
Information Outlet to Terminating
Endpoint (33 Feet) (10 m)
11 Information Outlet
2
3
8
9
7
1
10
11
11
5
4
6
inst_dis CJL 030796