Avaya MCC1, Установка и обновления

Страница: 815 / 874

Adjuncts and Peripherals
Printers
SI Installation and Upgrades 815
June 2004
Troubleshooting
To determine ESM link status enter the following commands from the system administration terminal:
1
Status esm
2
Status signaling-group
3
List MMI
NOTE:
When you move ESM circuit packs, you MUST remove the DS1 and signaling group
translations. You cannot use the
change circuit pack
command.
Refer to Expansion services module on page 813 for further information.
Printers
This section provides information on connecting and configuring printers that work with your system and
Avaya™ Communication Manager.
Connecting printers using TCP/IP
Printers can be connected to the switch using asynchronous TCP/IP links and a terminal server. This
section provides information on connecting adjuncts to the C-LAN and providing the initial
administration.
Task list
Whether you use an end-to-end TCP/IP configuration, a terminal server or a PC running RSP, you must
complete the following tasks:
•
Administering IP node names on page 803.
•
Administering IP services on page 803.
•
Administering adjunct parameters on page 815.
•
If you are using a terminal server, also complete Installing and administering the terminal server
on page 794.
•
If you are using a PC with the Downloadable RSP Tool, complete Using the downloadable
reliable session-layer protocol (RSP) tool on page 816.
Administering adjunct parameters
You must administer adjunct parameters to let the system know that the adjunct is connected through
TCP/IP.
PMS journal and PMS log printers
See Guestworks® and DEFINITY® Systems Technician Handbook for Hospitality Installations (555-
231-743).