Avaya MCC1, Установка и обновления

Страница: 499 / 874

Install and Wire Telephones
Task List: Wiring Examples and Wiring Procedures
SI Installation and Upgrades 499
June 2004
Install and Wire Telephones
The wiring procedures are the same for most of the Avaya Media Gateway telephones and other
equipment.
This task list provides wiring examples of similar installation procedures. These are examples only;
actual wiring procedures may vary at each site.
After installing the hardware, the data for telephone features must be administered. These procedures are
provided in the Administrator’s Guide for Avaya Communication Manager (555-233-506).
NOTE:
Refer to the Chapter , “Adjuncts and Peripherals” to install the necessary peripheral
equipment.
Task List: Wiring Examples and Wiring Procedures
•
Voice and Data Terminals on page 500
•
Analog Tie Trunk Example on page 506
•
Digital Tie Trunk Example on page 507
•
DS1 Tie Trunk Example on page 508
•
Auxiliary Connector Outputs on page 510
•
Three-Pair and Four-Pair Modularity on page 514
•
Adjunct Power Connection Locations on page 515
•
Attendant Console Example on page 516
•
Connect External Alarm Indicators and Auxiliary Power on page 519
•
Connect Power Distribution Unit External Alarm Wires on page 520
•
Remote Network Interface on page 523
•
Off-Premises or Out-of-Building Stations on page 526
•
Emergency Transfer Units and Associated Telephones on page 532
•
808A Emergency Transfer Panel and Telephone Installation Examples on page 533
•
Install External Ringing on page 544
•
Install the Queue Warning Indicator on page 545
These links provide useful reference information:
•
Voice and Data Terminals on page 500
•
Circuit Pack and Auxiliary Equipment Classifications on page 567
•
Connector and Cable Diagrams (Pinout Charts) on page 771