Avaya MCC1, Установка и обновления

Страница: 450 / 874

Bring the System Online
Administering the Circuit Packs
450 SI Installation and Upgrades
June 2004
Change Circuit Packs Form
NOTE:
Each page of the form represents 1 carrier within the cabinet specified on the command
line. All carriers and slots appear even if they are not included in the actual hardware. This
supports reconfiguration.
•
Cabinet
—
Display-only field. This field shows the cabinet number as entered on the
command line.
•
Carrier
—
Display-only field. This field shows the letter of the carrier (A through E) circuit
packs are being administered on.
•
Carrier Type
—
Display-only field. This field shows the type of carrier.
•
Slot
—
Display-only field. The slot equates to the physical slot of the given carrier; the number
of slots displayed depends on the system being configured.
For si configurations: ALL slots that could possibly be administered are displayed even if they
do not apply to the current configuration of the system. This is to accommodate the situation when
a system is being reconfigured.
Table 15, Circuit Pack Cabinet Layout, on page 450 lists the slots to use, and the circuit pack
types that may be administered in those slots, for each combination of Cabinet/Carrier/Carrier
Type in an si configuration.
•
Code
—
Enter the circuit pack code (TN followed by a 3- or 4-digit number). If there is a
physical circuit pack installed in the slot, the entry must match that of the circuit pack. If there is
equipment administered on a slot, the equipment must be removed from the circuit pack before
the circuit pack can be changed or removed.
•
Sfx
—
Enter the circuit pack suffix, if applicable.
•
Name
—
Display-only field. This field shows the alphanumeric name of the circuit pack (such as
Digital Line).
NOTE:
When the circuit pack physically inserted in the slot differs from what has been
administered on this form, a
#
displays between the
Sfx
and
Name
fields.
Table 15: Circuit Pack Cabinet Layout
Cabinet Layout Carrier Type
Use
Slots
Circuit Pack Types
1A (SCC1 Basic Control Cabinet) processor 01-10 All port circuit packs
1A (SCC1 Enhanced Control Cabinet) processor 01-16 All port circuit packs
1B (SCC1 Duplicated Control Cabinet) processor 01-10 All port circuit packs
1B, C, D (SCC1 Port Cabinet) port 01-18 All port circuit packs
2A & 3A (SCC1 Expansion Control
Cabinet) expansion-control 01 TN570D, TN776
02-17 All port circuit packs
2B, C, D (SCC1 Port Cabinet)
3B, C, D port 01-18 All port circuit packs