Install and Administer Trunks
Install CAMA/E911 Trunk
SI Installation and Upgrades
663
June 2004
10
In the
Rte Pat
field, type the desired Route Pattern (in the example, the route pattern is
12
).
NOTE:
For the following step, if you are using the Attendant Crisis Alerting feature, type alrt
instead of emer
11
In the
Call Type
field, enter
emer
and press Enter.
Figure 267: ARS Digit Analysis Table
Return to Task List
Changing the Route Patterns
Return to Task List
1
At the prompt, type
change route-pattern
<number>
(the route pattern to be changed; in the
example in
Figure 268, Route Pattern form (Page 1, Pattern Number 11),
on page 664, the route
pattern is
11
) and press Enter.
2
On the Route Pattern screen, in
Grp. No.
field, enter the CAMA trunk group number.
3
In the
FRL
field, enter 0.
NOTE:
For the following step, if the Central Office (CO) wants KP11ST as the dialed digit string,
then leave blank. If the CO wants KP911ST, then insert a 9 in the
Inserted Digits
field.
4
Administer the
Inserted Digits
field if needed and press Enter.
5
At the prompt, type
change route-pattern
<number>
(the route pattern to be changed; in
Figure
269, Route Pattern form (Page 1, Pattern Number 12),
on page 665, the route pattern is
12
) and
press Enter.
ARS DIGIT ANALYSIS TABLE
Partitioned Group Number: _ Percent Full: ___
Dialed Total Rte Call Nd ANI
Dialed Total Rte Call Nd ANI
String Mn Mx Pat Type Num
Rq
String Mn Mx Pat Type Num Rq
9________________ 7_ 7_ 2__ hnpa ___ n __________________ __ __ ___ ____ ___ _
976______________ 7_ 7_ den hnpa ___ n __________________ __ __ ___ ____ ___ _
11_______________ 2_ 2_ 11_ emer ___ n __________________ __ __ ___ ____ ___ _
911______________ 3_ 3_ 12_ emer ___ n __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __ ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
Содержание MCC1
