San Telequip SC10MK2 Скачать руководство пользователя

Страница: 1 / 20

San Telequip (P) Ltd.,
504,505 Deron Heights, Baner Road
Pune 411 045, India
Phone : +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email :

[email protected]

User Manual 2-Port TCP to RTU Gateway, Model SC10MK2 485 IOT 502

Table of Contents

Introduction ______________________________________________________________________________ 1

Product Specifications ______________________________________________________________________ 2

Product Panel Views _______________________________________________________________________ 3

Wiring Architecture ________________________________________________________________________ 5

Configuration _____________________________________________________________________________ 6

IP Search Utility Setup ___________________________________________________________________ 6

Web Browser Configuration _______________________________________________________________ 9

System Setup ___________________________________________________________________ 9

Network ______________________________________________________________________ 11

Serial ________________________________________________________________________ 13

3.9

Service: Modbus TCP Gateway - Select both Serial1 and Serial2 at the same time against a

specified TCP socket port commonly. ____________________________________________________ 14
4.

Access IP Control _______________________________________________________________ 15

Save & Restart _________________________________________________________________ 16

Backup Settings ________________________________________________________________ 16

Introduction

SC10MK2 485 IOT 502 Modbus TCP to RTU Gateway provides easy way of connecting Modbus RTU devices to

Wireless and Ethernet LAN. The wireless supports 802.11 b/g/n in AP/Station mode with WEP/WPA/WPA2

encryption for data transmission security. The Ethernet support 10/100 Mbps auto-detecting communication

speeds. This Gateway is designed to operate 2 Serial ports (RS-232/RS-422/485 Auto detect) over Wireless and

Ethernet network. It allows users to integrate Modbus/RTU and Modbus Serial devices to the TCP/IP network

with 8 TCP Masters simultaneously and 32 requests simultaneous per TCP Master.

SC10MK2 485 IoT 502 embedded with MT7688AN MIPS chipset makes it become the ideal device for

transmitting the data from your RS-232 or RS-422/485 Serial interface devices, such as PLCs, Meters and

Sensors to an IP-based Wi-Fi and Ethernet LAN. It is a high performance design composed with carefully

selecting qualified components from reliable and certified sources. This operation manual will guide you to

configure functions step by step.

Содержание SC10MK2





















Результаты поиска

Содержание SC10MK2

Отзывы:

Похожие инструкции для SC10MK2

Бренды по названию

Популярные бренды

San Telequip SC10MK2, Руководство пользователя

Результаты поиска

Содержание SC10MK2

Отзывы:

Похожие инструкции для SC10MK2

Бренды по названию

Популярные бренды