Avaya MCC1, Установка и обновления

Страница: 59 / 874

Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
SI Installation and Upgrades 59
June 2004
11
Click on the Continue Upgrade Registration button.
The DEFINITY Product List page appears.
12
Look in the product table (first column heading is “#”) to find the row for the product that you
want to register. Click on the number in the far-left column (“#”) of the correct row.
NOTE:
It might be helpful to identify the product by looking at the Product Nickname, Product
Alarm ID, INADS Number, Serial Number, or IP Address columns in the table.
If the product is not shown in the table, or if you are not sure whether a listed product is the one
you want to register, contact the DBA group for assistance (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2).
Four new fields appear.
13
In the
Data Lock
field, choose:
— YES for products with ASG enabled
— NO for all others
14
In the
Dialing Type
field choose the dialing type that the product will use to report alarms:
— DON’T CHANGE to leave the product’s dialing type unchanged
— TONE for DTMF dialing
— PULSE for rotary or pulse dialing
15
In the
Alarm Origination
field choose:
— DON’T CHANGE to leave the product’s current alarm origination status unchanged (the
common choice for upgrades).
— YES to enable alarm origination.
— NO for no alarm origination.
16
In the
Alarm Destination
field, choose
— DON’T CHANGE to leave the product’s currently-administered alarm origination number
unchanged (the common choice for upgrades).
— SET NUMBER TO and type the complete alarm destination telephone number, including
any dialing prefix (for example, “9” or “*9”). The default value in this field is the TSO-
Denver number (18005353573).
17
Click on the Continue Registration button at the bottom of the page.
ART begins automatically registering the product and displays progress messages to indicate the
current status.
CAUTION:
DO NOT exit your browser or click on the Refresh, Back, Stop, or Home buttons while
ART displays these progress messages.
If you have to abort your registration, click on the Abort Session button that appears with
one of the progress messages.
If the preceding steps have been completed successfully, ART displays the DEFINITY Upgrade
Registration Report.