Dell C9000 series, Reference Manual

Page: 2281 / 2286

vlan-stack compatible
Enable the stackable VLAN feature on a VLAN.
C9000 Series
Syntax
vlan-stack compatible
To disable the Stackable VLAN feature on a VLAN, use the
no vlan-stack
compatible
command.
Defaults Not configured.
Command Modes CONF-IF-VLAN
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the C-Series and S-Series.
Usage Information Prior to disabling the stackable VLAN feature, remove the members.
To view the stackable VLANs, use the
show vlan
command in EXEC Privilege mode.
Stackable VLANs contain members, designated by the M in the Q column of the
command output.
Example
Dell#show vlan
Codes: * - Default VLAN, G - GVRP VLANs
NUM Status Q Ports
* 1 Inactive
2 Active M Te 2/13
M Te 2/0-2
VLAN Stacking 2281