Command Modes
LINE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant
Dell Networking Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.9(0.0)
Introduced on the C9010.
9.2(1.0)
Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Authentication and Password
Commands
To manage access to the system, use the following the commands.
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
C9000 Series
Syntax
aaa authentication enable {default |
method-list-name
}
method
[
...
method2
]
To return to the default setting, use the
no aaa authentication enable
{default |
method-list-name
}
method
[
... method2
]
command.
Parameters
default
Enter the keyword
default
then the authentication methods to
use as the default sequence of methods for the Enable login.
The default is
default enable
.
Security
1930
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...
