Dell C9000 series, Reference Manual

Page: 748 / 2286

show diag
Display results of offline diagnostic tests on a switch.
C9000 Series
Syntax
show diag {cp unit-id [detail | summary]| pe pe-id stack-unit
unit-number }|information | linecard slot-id [detail | summary]|
testcase {cp | pe pe-id | linecard slot-id } }
From a PE console , use
show diag testcase stack-unit unit number
[detail | summary]
Parameters
cp unit-id Enter the
cp unit-id
parameters to display the results only of
the offline diagnostic tests run on the Control Processor CPU.
The Control Processor CPU ID is 0.
pe pe-id Enter the
pe pe-id
parameters to display the results only of the
offline diagnostic tests run on the Port Extender (PE). The PE ID
range is from 0 to 255.
NOTE: The pe option is only available when the feature
extended bridge is enabled.
stack-unit unit-
number
Enter the
stack—unit unit-number
parameters to display the
offline diagnostic test results of a specified stack-unit.
information Enter the keyword
information
to view the current diag
information in the system.
linecard slot-id Enter the
linecard slot-id
parameters to display the results
only of the offline diagnostic test run on a specified line card. he
range of line-card CPU IDs is from 0 to 11. Each line-card CPU
processes packets on the corresponding switch line card; for
example, line-card CPU 1 processes packets on line card 1.
summary Enter the keyword
summary
to display a summary of the offline
diagnostic test results.
detail Enter the keyword
detail
to display detailed information about
the offline diagnostic test results.
testcase Enter the keyword
testcase
to display the diag testcases
available for CP, PE, or the Linecard.
Defaults View a summary of the offline diagnostic test results that ran on all CPUs (Control
Processor, Route Processor, line cards, and Port Extenders).
Command Modes EXEC Privilege
Debugging and Diagnostics 748