Dell C9000 series, Reference Manual

Page: 1199 / 2286

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Related
Commands show ip interface — displays the interface routing status and configuration.
ip route
Assign a static route to the switch.
C9000 Series
Syntax
ip route { destination mask { ip-address | interface [ slot/port ] |
[tunnel tunnel-id ] [ distance ] | [permanent] | tag tag-value }}[vrf
vrf-name ]
To delete a specific static route, use the
no ip route destination mask
command.
To delete all routes matching a certain route, use the
no ip route destination
mask
command.
Parameters
destination Enter the IP address in dotted decimal format of the destination
device.
mask Enter the mask in the slash prefix format (/x) of the destination IP
address.
ip-address Enter the IP address of the forwarding router in dotted decimal
format.
interface interface Enter one of the following keywords and slot/port or number
information:
• For a null interface, enter the keyword
null
then the slot/
port information. The Null interface number is 0.
• For a Management Ethernet interface, enter the keyword
managementethernet
then the slot/port information.
• For a Loopback interface, enter the keyword
loopback
then the slot/port information. The range is from 0 to
16383.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
IPv4 Routing 1199