Dell C9000 series, Reference Manual

Page: 1809 / 2286

match ip vlan
Uses a VLAN as the match criterion for an L3 class map.
C9000 Series
Syntax
match ip vlan vlan-id
To remove VLAN as the match criterion, use the
no match ip vlan vlan-id
command.
Parameters
vlan vlan-id Enter the keyword vlan and then the ID of the VLAN. The range
is from 1 to 4094.
Defaults none
Command Modes CONF-CLASS-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information To access this command, enter the
class-map
command. After the class map is
identified, you can configure the match criteria.
Use this command to match an IP class-map against a single VLAN ID .
Related
Commands class-map — identifies the class map.
match mac access-group
Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
C9000 Series
Syntax
match mac access-group { mac-acl-name }
Quality of Service (QoS) 1809