Dell C9000 series, Reference Manual

Page: 1458 / 2286

notifications Enables debugging on the notifications of all tracked objects.
object-id Enables debugging on the state and notifications of the
specified tracked object. The range is from 1 to 500.
Defaults Enable debugging on the state and notifications of all tracked objects (
debug track
all
).
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Example
Dell#debug track all
04:35:04: %RPM0-P:RP2 %OTM-5-STATE: track 6 - Interface
TenGigabitEthernet 1/2/1
line-protocol DOWN
04:35:04: %RPM0-P:RP2 %OTM-5-NOTIF: VRRP notification: resource
ID 6 DOWN
delay
Configure the time delay used before communicating a change in the status of a tracked object to clients.
C9000 Series
Syntax
delay {[up seconds ] [down seconds ]}
To return to the default setting, use the
no delay
command.
Parameters
seconds Enter the number of seconds the object tracker waits before
sending a notification about the change in the UP and/or DOWN
Object Tracking 1458