Dell C9000 series, Reference Manual

Page: 2108 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
bridge-priority
Set the bridge priority of the switch in an IEEE 802.1D spanning tree.
C9000 Series
Syntax
bridge-priority { priority-value | primary | secondary}
To return to the default value, use the
no bridge-priority
command.
Parameters
priority-value Enter a number as the bridge priority value. The range is from 0
to 65535. The default is
32768 .
primary Enter the keyword
primary
to designate the bridge as the root
bridge.
secondary Enter the keyword
secondary
to designate the bridge as a
secondary root bridge.
Defaults priority-value = 32768
Command Modes SPANNING TREE (The prompt is “config-stp”.)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Spanning Tree Protocol (STP) 2108