Dell C9000 series, Reference Manual

Page: 436 / 2286

Command Modes ROUTER BGP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Usage Information This command is a
knob to disable BGP next-hop resolution using BGP learned routes.
During the next-hop resolution, only the first route that the next-hop resolves through
is verified for the route’s protocol source and is checked if the route is learned from
BGP or not.
The
clear ip bgp
command is required for this command to take effect and to keep
the BGP database consistent. Execute the
clear ip bgp
command right after
executing this command.
Related
Commands clear ip bgp — clears the ip bgp.
bgp regex-eval-optz-disable
Disables the Regex Performance engine that optimizes complex regular expression with BGP.
C9000 Series
Syntax
bgp regex-eval-optz-disable
To re-enable optimization engine, use the
no bgp regex-eval-optz-disable
command.
Defaults Enabled
Command Modes ROUTER BGP (conf-router_bgp)
Border Gateway Protocol 436