Dell C9000 series, Reference Manual

Page: 1814 / 2286

Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Expanded to add support for Layer 2.
6.1.1.1 Introduced on the E-Series.
Usage Information The input policy map is used to classify incoming traffic to different flows using class-
map, QoS policy, or incoming packets DSCP. This command enables Policy-Map-Input
Configuration mode (conf-policy-map-in).
When you configure an input policy map for CoPP, you must enter the keyword
cpu-
qos
.
Use this command in Configuration Terminal Batch mode to create an input policy
map in a dual-homing setup.
Related
Commands
service-queue — assigns a class map and QoS policy to different queues.
policy-aggregate — allows an aggregate method of configuring per-port QoS using
policy maps.
service-policy input — applies an input policy map to the selected interface.
policy-map-output
Create an output policy map.
C9000 Series
Syntax
policy-map-output policy-map-name
To remove a policy map, use the
no policy-map-output policy-map-name
command.
Quality of Service (QoS) 1814