Dell C9000 series, Reference Manual

Page: 846 / 2286

Parameters
maximum-paths Specify the maximum number of ECMP for a route. The range is
2 to 64.
path-fallback Use the keywords
path-fallback
to enable this feature. If you
enable the feature, re-enter this keyword to disable the feature.
Defaults 16
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
Usage Information You must save the new ECMP settings to the startup-config (
write-mem
) then reload
the system for the new settings to take effect.
Related
Commands show ip cam linecard – Display content-addressable memory (CAM) entries for a set of
ports on a line card.
ip ecmp weighted
Enables weighted ECMP calculations.
C9000 Series
Syntax
ip ecmp weighted
To disable weighted ECMP calculations, enter the
no ip ecmp weighted
command.
Defaults N/A
Command Modes CONFIGURATION
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S-Series.
Usage Information Enabling this CLI would inform the FIB to re-program the destination prefix paths with
weights in the HW/CAM on the fly.
Equal Cost Multi-Path (ECMP) 846