manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 1614

for PE are stored in the following directory: 

flash://default_diag_report_dir

. 

To view the test report, use the 

show file flash://filename

 command.

Command History This guide is platform-specific. For command information about other platforms, see 

the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on C9010 and C1048P.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

8.3.1.0

Introduced the 

verbose

 option.

7.7.1.0

Introduced on the S-Series.

Example

Dell#offline stack-unit 3

Warning - offline of unit will bring down all the protocols and

the unit will be operationally down, except for running 

Diagnostics.

Please make sure that stacking is not configured for Diagnostics 

execution.

If configured, the unit roles may change. The unit will become 

standalone once diags are executed.

Also reboot/online command is necessary for normal operation 

after the offline command is issued.

Proceed with Offline [confirm yes/no]:yes

Dell#diag stack-unit 3 level0

Warning - diagnostic execution will cause multiple link flaps on 

the peer side - advisable to shut directly connected ports

Proceed with Diags [confirm yes/no]: yes

 

Related 
Commands

•

offline

•

online

PE Console Commands

1614

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands