Dell C9000 series, Reference Manual

Page: 488 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information Peers that are enabled within a peer group are disabled when their peer group is
disabled.
The
neighbor shutdown
command terminates all BGP sessions on the BGP neighbor
or BGP peer group. Use this command with caution as it terminates the specified BGP
sessions. When a neighbor or peer group is shut down, use the
show ip bgp
summary
command to confirm its status.
Related
Commands
show ip bgp summary — displays the current BGP configuration.
show ip bgp neighbors — displays the current BGP neighbors.
neighbor soft-reconfiguration inbound
Enable soft-reconfiguration for BGP.
C9000 Series
Syntax
neighbor { ip-address | peer-group-name } soft-reconfiguration
inbound
To disable, use the
no neighbor { ip-address | peer-group-name } soft-
reconfiguration inbound
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to disable or enable all routers
within the peer group.
Border Gateway Protocol 488