Dell C9000 series, Reference Manual

Page: 1672 / 2286

If you use this command on a peer VLT node, only the synced routes are deleted from
the multicast route table.
debug ip pim
View IP PIM debugging messages.
C9000 Series
Syntax
debug ip pim [bsr | events | group | packet [in | out] | register
| state | timer [assert | hello | joinprune | register]]
To disable PIM debugging, use the
no debug ip pim
command or use the
undebug
all
to disable all debugging command.
Parameters
bsr (OPTIONAL) Enter the keyword
bsr
to view PIM Candidate
RP/BSR activities.
events (OPTIONAL) Enter the keyword
group
to view PIM messages for
a specific group.
group (OPTIONAL) Enter the keyword
group
to view PIM messages for
a specific group.
packet [in | out] (OPTIONAL) Enter the keyword
packet
to view PIM packets.
Enter one of the optional parameters:
•
in
: to view incoming packets
•
out
: to view outgoing packets
register (OPTIONAL) Enter the keyword
register
to view PIM register
address in dotted decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword
state
to view PIM state
changes.
timer [assert |
hello | joinprune |
register] (OPTIONAL) Enter the keyword
timer
to view PIM timers. Enter
one of the optional parameters:
•
assert
: to view the assertion timer
•
hello
: to view the PIM neighbor keepalive timer
•
joinprune
: to view the expiry timer (join/prune timer)
•
register
: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
PIM-Sparse Mode (PIM-SM) 1672