Dell C9000 series, Reference Manual

Page: 1730 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the C9010.
Usage Information The Configuration Terminal Batch mode is used to setup common configurations on a
port extender connected in a dual-homing environment. Use the
discard
command
to cancel the uncommitted common configuration changes.
Example The following example shows the configurations being discarded:
Dell(conf-b)#interface vlan 2000
Dell(conf-b-if-vl-2000)#tagged peGigE 184/0/1
Dell(conf-b-if-vl-2000)#show config
interface vlan 2000
tagged peGigE 184/0/1
Dell(conf-b-if-vl-2000)#discard
Dell(conf-b)#show config
Dell(conf-b)#exit
Dell#
import peer-config
Use
import peer-config
to import the common configurations from the peer chassis.
C9000 Series
Syntax import peer-config
Default None
Command Modes
EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the C9010.
Usage Information Use the
import peer-config
to import the common configurations from the peer
chassis and apply them in the local system.
Port Extenders (PE) 1730