manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 1799

bandwidth-percentage

Assign a percentage of weight to the class/queue.

C9000 Series

Syntax

bandwidth-percentage 

percentage

To remove the bandwidth percentage, use the 

no bandwidth-percentage 

command.

Parameters

percentage

Enter the percentage assignment of weight to the class/queue. 
The range is from 1 to 100% (granularity 1%).

Defaults

none

Command Modes

CONFIGURATION (conf-qos-policy-out)

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

8.3.1.9.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

6.2.1.1

Introduced on the E-Series.

Usage Information The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages given 

to all eight classes exceeds 100%, the bandwidth percentage automatically scales down 
to 100%.

Related 
Commands

qos-policy-output

 — creates a QoS output policy.

Quality of Service (QoS)

1799

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands