Dell C9000 series, Reference Manual

Page: 1360 / 2286

To remove advertised dot1-tlv, use the
no advertise dot1-tlv {port-
protocol-vlan-id | port-vlan-id | vlan-name}
command.
Parameters
port-protocol-
vlan-id Enter the keywords
port-protocol-vlan-id
to advertise the
port protocol VLAN identification TLV.
port-vlan-id Enter the keywords
port-vlan-id
to advertise the port VLAN
identification TLV.
vlan-name Enter the keywords
vlan-name
to advertise the vlan-name TLV.
This keyword is only supported on the C-Series and S-Series.
Defaults Disabled.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface -lldp)
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series. Added the
vlan-name
option.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
protocol lldp (Configuration) — enables LLDP globally.
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
Link Layer Discovery Protocol (LLDP) 1360