Dell C9000 series, Reference Manual

Page: 1428 / 2286

Version Description
6.5.1.0 Introduced.
Usage Information By default, all VLANs are mapped to MST instance zero (0) unless you use the
vlan
range
command to map it to a non-zero instance.
name
The name you assign to the multiple spanning tree region.
C9000 Series
Syntax
name region-name
To remove the region name, use the
no name
command.
Parameters
region-name Enter the MST region name. The range is 32 character limit.
Defaults no default name.
Command Modes MULTIPLE SPANNING TREE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Introduced.
Usage Information For two MSTP switches to be within the same MSTP region, the switches must share
the same region name (including matching case).
Multiple Spanning Tree Protocol (MSTP) 1428