To delete a daylight saving time zone configuration, use the
no clock summer-time
command.
Parameters
time-zone
Enter the three-letter name for the time zone. This name is
displayed in the show clock output. You can enter up to eight
characters.
start-week
(OPTIONAL) Enter one of the following as the week that daylight
saving begins and then enter values for start-day through end-
time:
•
week-number
: Enter a number from 1 to 4 as the number
of the week in the month to start daylight saving time.
•
first
: Enter this keyword to start daylight saving time in
the first week of the month.
•
last
: Enter this keyword to start daylight saving time in
the last week of the month.
start-day
Enter the name of the day that you want daylight saving time to
begin. Use English three letter abbreviations; for example, Sun,
Sat, Mon, and so on. The range is from Sun to Sat.
start-month
Enter the name of one of the 12 months in English.
start-time
Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-week
Enter the one of the following as the week that daylight saving
ends:
•
week-number
: enter a number from 1 to 4 as the number
of the week to end daylight saving time.
•
first
: enter the keyword
first
to end daylight saving
time in the first week of the month.
•
last
: enter the keyword
last
to end daylight saving time
in the last week of the month.
end-day
Enter the weekday name that you want daylight saving time to
end. Enter the weekdays using the three letter abbreviations; for
example Sun, Sat, Mon, and so on. The range is from Sun to Sat.
end-month
Enter the name of one of the 12 months in English.
end-time
Enter the time in hours:minutes:seconds. For the hour variable,
use the 24-hour format; example, 17:15:00 is 5:15 pm.
offset
(OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to 1440. The default is
60 minutes
.
Defaults
Not configured.
Command Modes
CONFIGURATION
System Time and Date
2161
Summary of Contents for C9000 series
Page 1: ...Dell Networking Command Line Reference Guide for the C9000 Series Version 9 10 0 0 ...
Page 394: ...deny 14551 666 Dell Access Control Lists ACL 394 ...
Page 877: ...algorithm FIPS Cryptography 877 ...
Page 1297: ...Total 5 0 Total 5 active route s using 952 bytes IPv6 Basics 1297 ...