manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 1073

ip router isis

Configure IS-IS routing processes on an interface and attach an area tag name to the routing process.

C9000 Series

Syntax

ip router isis [

tag

]

To disable IS-IS on an interface, use the 

no ip router isis [

tag

]

 command.

Parameters

tag

(OPTIONAL) The tag you specify identifies a specific area routing 
process. If you do not specify a tag, a null tag is assigned.

Defaults

No processes are configured.

Command Modes

INTERFACE

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.8(0.0)

Introduced on the S3048-ON and S4048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.5(0.1)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.3.11.1

Introduced on the Z9000.

7.5.1.0

Introduced.

Usage Information To assign a network entity title to enable IS-IS, use the 

net

 command.

This command accepts even if an IP address is not configured. This command is 
cached in the L3 Manager till the IP address is configured. When the IP address 
configuration reaches the L3Manager, the circuit add message is sent to IS-IS.

NOTE: 

IP address is not mandatory for forming IS-IS adjacency.

Intermediate System to Intermediate System (IS-IS)

1073

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands