Dell C9000 series, Reference Manual

Page: 1674 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Usage Information This command is applied to the subsequent PIM-BSR. Existing BSR advertisements are
cleaned up by time-out. To clean the candidate RP advertisements, use the
clear ip
pim rp-mapping
command.
ip pim bsr-candidate
To join the Bootstrap election process, configure the PIM router.
C9000 Series
Syntax
ip pim bsr-candidate interface ][ hash-mask-length ] [ priority ]
To return to the default value, use the
no ip pim bsr-candidate
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN, enter the keyword
vlan
then a number from 1
to 4094.
hash-mask-length (OPTIONAL) Enter the hash mask length. The range is from zero
(0) to 32. The default is
30 .
priority (OPTIONAL) Enter the priority used in Bootstrap election
process. The range is from zero (0) to 255. The default is
zero
(0) .
Defaults Not configured.
PIM-Sparse Mode (PIM-SM) 1674