Dell C9000 series, Reference Manual

Page: 1302 / 2286

iscsi priority-bits
Configure the priority bitmap that advertises in the iSCSI application TLVs.
C9000 Series
Syntax
iscsi priority-bits
To remove the configured priority bitmap, use the
no iscsi priority-bits
command.
Defaults 4 (0x10 in the bitmap)
Command Modes PROTOCOL LLDP (only on the global, not on the interface)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.6(0.0) Introduced on the Z9500.
iscsi profile-compellant
Configure the auto-detection of Dell Compellent arrays on a port.
C9000 Series
Syntax
iscsi profile-compellent
Defaults Dell Compellent disk arrays are not detected.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
iSCSI Optimization 1302