Dell C9000 series, Reference Manual

Page: 2021 / 2286

protocol-tunnel rate-limit
Enable traffic rate limiting per box.
C9000 Series
Syntax
protocol-tunnel rate-limit rate
To reset the rate limit to the default, use the
no protocol-tunnel rate-limit
rate
command.
Parameters
rate Enter the rate in frames per second. The range is from 64 to 320
Kbps.
Defaults no default rate-limit.
Command Modes INTERFACE VLAN
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series, E-Series TeraScale, and E-Series
ExaScale. Maximum rate limit on E-Series reduced from 4000 to
3000.
7.4.1.0 Introduced
Example
Dell(conf)#interface vlan 4001
Dell(conf-if-vl-4001-stack)#protocol-tunnel rate-limit 100
Related
Commands
show protocol-tunnel — displays tunneling information for all VLANs.
show running-config — displays the current configuration.
Service Provider Bridging 2021