Dell C9000 series, Reference Manual

Page: 1661 / 2286

ip pim query-interval
Change the frequency of PIM Router-Query messages.
C9000 Series
Syntax
ip pim query-interval seconds
To return to the default value, use the
no ip pim query-interval seconds
command.
Parameters
seconds Enter a number as the number of seconds between router query
messages. The range is from 0 to 65535. The default is
30
seconds .
Defaults 30 seconds
Command Modes
INTERFACE
INTERFACE (BATCH Mode)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series for the port-channels and the S-
Series.
PIM-Source Specific Mode (PIM-SSM) 1661