Dell C9000 series, Reference Manual

Page: 640 / 2286

Example
Dell# show ip bgp summary
BGP router identifier 55.55.55.55, local AS number 18508
BGP table version is 0, main routing table version 0
6 BGP path attribute entrie(s) using 392 bytes of memory
6 BGP AS-PATH entrie(s) using 294 bytes of memory
6 BGP community entrie(s) using 234 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/
Pfx
1109::33 18508 0 0 0 0 0 never Active
2222::220 18508 0 0 0 0 0 never Active
4000::33 18508 0 0 0 0 0 never Active
4000::60 18508 0 0 0 0 0 never Active
9000::4:2 18508 0 0 0 0 0 never Active
9000::5:2 1 35 32 0 0 0
00:16:42 0
9000::6:2 2 35 32 0 0 0
00:16:39 0
9000::7:2 3 35 32 0 0 0
00:16:41 0
9000::8:2 18508 35 32 0 0 0
00:16:42 0
9000::9:2 18508 44 19 0 0 0
00:16:41 0
9000::a:2 18508 35 32 0 0 0
00:16:43 0
9000::b:14 18508 29 29 0 0 0
00:13:01 0
Dell#
timers bgp
Allows you to adjust the BGP network timers for all neighbors.
C9000 Series
Syntax
timers bgp keepalive holdtimer
To return to the default values, use the
no timers bgp
command.
Parameters
keepalive Enter the time interval in seconds between which the software
sends keepalive messages. The range is 1 to 65535. The default
is
60 seconds .
holdtimer Enter the time interval in seconds which the software waits since
the last keepalive message before declaring a BGP peer dead.
The range is 3 to 65535. The default is
180 seconds .
Defaults
•
keepalive
= 60 seconds
•
holdtimer
= 180 seconds
Border Gateway Protocol 640