Dell C9000 series, Reference Manual

Page: 701 / 2286

To specify a port range, you can enter a hyphenated range of one or more port range values
separated with commas; for example,
show interfaces tengigabitethernet 10/0-1 ets
summary
. To enter any random number of ports, you can enter a comma-separated string of port
numbers, for example
show interfaces tengigabitethernet 10/2,4 ets summary
The following describes the
show interface summary
command shown in the following
example.
Field Description
Interface Interface type with stack-unit and port number.
Max Supported
TC Group Maximum number of priority groups supported.
Number of Traffic
Classes Number of 802.1p priorities currently configured.
Admin mode ETS mode: on or off. When on, the scheduling and bandwidth allocation
configured in an ETS output policy or received in a DCBX TLV from a peer
can take effect on an interface.
Admin Parameters ETS configuration on local port, including priority groups, assigned dot1p
priorities, and bandwidth allocation.
Remote
Parameters ETS configuration on remote peer port, including admin mode (enabled if a
valid TLV was received or disabled), priority groups, assigned dot1p
priorities, and bandwidth allocation. If ETS admin mode is enabled on the
remote port for DCBX exchange, the Willing bit received in ETS TLVs from
the remote peer is included.
Local Parameters ETS configuration on local port, including admin mode (enabled when a
valid TLV is received from a peer), priority groups, assigned dot1p priorities,
and bandwidth allocation.
Operational status
(local port) Port state for current operational ETS configuration:
•
Init
: Local ETS configuration parameters were exchanged with the
peer.
•
Recommend
: Remote ETS configuration parameters were received
from the peer.
•
Internally propagated
: ETS configuration parameters were
received from the configuration source.
ETS DCBX Oper
status Operational status of the ETS configuration on the local port: match or
mismatch.
State Machine
Type Type of state machine used for DCBX exchanges of ETS parameters:
Feature — for legacy DCBX versions; Asymmetric — for an IEEE version.
Conf TLV Tx
Status Status of ETS Configuration TLV advertisements: enabled or disabled.
ETS TLV Statistic:
Input Conf TLV
pkts Number of ETS Configuration TLVs received.
Data Center Bridging (DCB) 701