Dell C9000 series, Reference Manual

Page: 1683 / 2286

Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage Information First-hop routers use this address by to send register packets on behalf of source
multicast hosts. The RP addresses are stored in the order in which they are entered. RP
addresses learned using BSR take priority over static RP addresses. Without the
override
option, RPs advertised by the BSR updates take precedence over the
statically configured RPs.
ip pim rp-candidate
To send out a Candidate-RP-Advertisement message to the bootstrap (BS) router or define group prefixes
that are defined with the RP address to PIM BSR, configure a PIM router.
C9000 Series
Syntax
ip pim rp-candidate { interface [ priority ]}
To return to the default value, use the
no ip pim rp-candidate { interface
[ priority ]}[vrf vrf-name ]
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
PIM-Sparse Mode (PIM-SM) 1683