Dell C9000 series, Reference Manual

Page: 1852 / 2286

description
Enter a description of the rapid spanning tree.
C9000 Series
Syntax
description { description }
To remove the description, use the
no description { description }
command.
Parameters
description Enter a description to identify the rapid spanning tree (80
characters maximum).
Defaults none
Command Modes SPANNING TREE (The prompt is “config-rstp”.)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced.
Related
Commands protocol spanning-tree rstp — enters SPANNING TREE mode on the switch.
Rapid Spanning Tree Protocol (RSTP) 1852