Dell C9000 series, Reference Manual

Page: 188 / 2286

source-interface (OPTIONAL) Enter the keywords
/source-interface
then the
interface information to include the source interface. Enter the
following keywords and slot/port or number information:
• For a Loopback interface, enter the keyword
loopback
then a number from zero (0) to 16383.
• For the Null interface, enter the keyword
null
then 0.
• For a Port Channel interface, enter the keyword
port-
channel
then a number. The range is from 1 to 128.
• For Tunnel interface types, enter the keyword
tunnel
then
the slot/ port information. The range is from 1 to 16383.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810. Added support for source-interface
for link-local IPv6 addressing.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced on the E-Series ExaScale (IPv6). Increased the
number of VLANs on ExaScale to 4094 (was 2094).
8.1.1.0 Introduced on the E-Series ExaScale (IPv4).
7.9.1.0 Introduced VRF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and added support for IPv6 address
on the E-Series only.
Control and Monitoring 188