manualshive.com logo in svg

Dell C9000 series, Reference Manual

Introducing the Dell C9000 Series - an exceptional range of high-performance products designed to revolutionize your computing experience. Discover the power of this innovative series with our comprehensive Reference Manual, available for free download at manualshive.com, providing you with essential insights and instructions to maximize your device's potential.

Share
Download
background image

            sh         2646016              0             0          733184

     mount_mfs         2658304              0             0         7741440

     mount_mfs         2658304              0             0         5144576

     mount_mfs         2658304              0             0        59547648

     mount_mfs         2658304              0             0          450560

            sh         2646016              0             0          593920

          init         2646016              0             0          184320

      [system]               0              0             0         1687552

           tme          220048              0        220048          220048

           ipc           16652              0         16652           16652

      timerMgr           33304              0         33304           33304

     sysAdmTsk           33212              0         33212           33212

         count              88              0            88              88

      sflPEAgt         2605478        2484600        137442          120878

      aclAgent          305820         281588        156744           24232

       ifagt_1      3272305868     3272301020        104232            4848

         dsagt           24254              0         24254           24254

       L2Agent         1247242         612868        650938          634374

       brAgent          155698          82820         72878           72878

       nvAgent            4566              0          4566            4566

----------------------------------- show process cpu 

------------------------ 

      CPU Statistics Of Unit 1

     ====================================== 

CPU utilization for five seconds: 1%/0%; one minute: 0%; five minutes: 0%

PID        Runtime(ms) Invoked  uSecs  5Sec   1Min  5Min  TTY      Process 

0x4bc86020  3982860  398286   10000  1.00%  0.67%  0.48%  0         ifagt_1

0x4bc50020   127380   12738   10000  0.00%  0.00%  0.00%  0         diagagt

0x4bc3a020        0       0       0  0.00%  0.00%  0.00%  0        debugagt

0x4bc25020       30       3   10000  0.00%  0.00%  0.00%  0       F10StkMgr

0x4bc10020   242100   24210   10000  0.00%  0.00%  0.00%  0          envmgr

0x4bb76020   222230   22223   10000  0.00%  0.00%  0.00%  0           lcMgr

0x4bb60020    15370    1537   10000  0.00%  0.00%  0.00%  0             dla

0x4bb3d020    71010    7101   10000  0.00%  0.00%  0.00%  0       sysAdmTsk

0x4bb27020   759200   75920   10000  0.00%  0.00%  0.00%  0        timerMgr

0x4bb10020    53930    5393   10000  0.00%  0.00%  0.00%  0              PM

0x4baf8020  1928170  192817   10000  0.00%  0.08%  0.00%  0              KP

0x4bae2020        0       0       0  0.00%  0.00%  0.00%  0           evagt

0x4bac5020    40140    4014   10000  0.00%  0.00%  0.00%  0             ipc

0x4bab1020    13800    1380   10000  0.00%  0.00%  0.00%  0       sysReaper

0x4ba56020       40       4   10000  0.00%  0.00%  0.00%  0             tme

0x4ba41020        0       0       0  0.00%  0.00%  0.00%  0    ttraceIpFlow

0x4ba2a020        0       0       0  0.00%  0.00%  0.00%  0         isrTask

0x4b1ba020        0       0       0  0.00%  0.00%  0.00%  0            tDDB

0x4b1a6020     5390     539   10000  0.00%  0.00%  0.00%  0              GC

0x4b174020       50       5   10000  0.00%  0.00%  0.00%  0 linkscan_user_t

0x4af77020        0       0       0  0.00%  0.00%  0.00%  0 bshell_reaper_t

0x4abcc020        0       0       0  0.00%  0.00%  0.00%  0         tSysLog

0x4ab9f020   106760   10676   10000  0.00%  0.00%  0.00%  0      tTimerTask

0x4ab6f020  3480010  348001   10000  0.00%  0.00%  0.05%  0        tExcTask

0x4ab5f020       20       2   10000  0.00%  0.00%  0.00%  0        tLogTask

0x4ab3e020    68110    6811   10000  0.00%  0.00%  0.00%  0        tUsrRoot

0x40697020      590      59   10000  0.00%  0.00%  0.00%  0            main

0x4c593020        0       0       0  0.00%  0.00%  0.00%  0 nvProcessMwpAck

0x4c17a020      370      37   10000  0.00%  0.00%  0.00%  0         brAgent

0x4be61020   494050   49405   10000  0.00%  0.00%  0.02%  0         nvAgent

0x4be4a020   569630   56963   10000  0.00%  0.00%  0.00%  0    l2ProcMwpAck

0x4bd28020   887440   88744   10000  0.00%  0.00%  0.00%  0         L2Agent

0x4bd0f020      230      23   10000  0.00%  0.00%  0.00%  0           dsagt

0x4bcf4020        0       0       0  0.00%  0.00%  0.00%  0     ifaDispatch

0x4bb7b020       30       3   10000  0.00%  0.00%  0.00%  0          POEAgt

0x4bb86020     7240     724   10000  0.00%  0.00%  0.00%  0        aclAgent

0x4bbbe020   267310   26731   10000  0.00%  0.00%  0.00%  0        sflPEAgt

0x4bbbb020   129340   12934   10000  0.00%  0.00%  0.00%  0           count

0x4bba7020        0       0       0  0.00%  0.00%  0.00%  0     poePortScan

0x4c77a020  1612410  161241   10000  0.00%  0.00%  0.00%  0           PETmr

      CPU Statistics Of Unit 3

Control and Monitoring

176

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for C9000 series

Lanner NCA-2510 Installation Manual preview
NCA-2510
Brand: Lanner Pages: 2
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Brand: Allied Telesis Pages: 1
peplink balance ONE Manual preview
balance ONE
Brand: peplink Pages: 2
VCS VideoJet 100 Manual preview
VideoJet 100
Brand: VCS Pages: 118
IBASE Technology FWA8207 Series User Manual preview
FWA8207 Series
Brand: IBASE Technology Pages: 39
Olicom Ethernet MCA 10/100 Adapter Manual To Operations preview
Ethernet MCA 10/100 Adapter
Brand: Olicom Pages: 88
Handicare DX REM 420 User Manual preview
DX REM 420
Brand: Handicare Pages: 60
Zalip CDE570AM-U User Manual preview
CDE570AM-U
Brand: Zalip Pages: 76
EMC VNX5300 Block Hardware Information Manual preview
VNX5300 Block
Brand: EMC Pages: 88
ZyXEL Communications Prestige 643 User Manual preview
Prestige 643
Brand: ZyXEL Communications Pages: 191
Idis DR-8516 Installation Manual preview
DR-8516
Brand: Idis Pages: 28
AMG AMG9050 series Instruction Manual preview
AMG9050 series
Brand: AMG Pages: 4
LOOQS MB202 User Manual preview
MB202
Brand: LOOQS Pages: 69
LOOQS MeeBox MB201 User Manual preview
MeeBox MB201
Brand: LOOQS Pages: 76
NetApp NS224 Instructions Manual preview
NS224
Brand: NetApp Pages: 28
Tripp Lite N302-010 Specification Sheet preview
N302-010
Brand: Tripp Lite Pages: 2
Juniper SSR1200 Hardware Manual preview
SSR1200
Brand: Juniper Pages: 84
D-Link DES-1008FX User Manual preview
DES-1008FX
Brand: D-Link Pages: 37

Brands by name

Popular brands

Load more brands