Dell C9000 series, Reference Manual

Page: 1026 / 2286

Usage Information To view the show output for multiple ports of a specified slot at a time, you can specify
any random port number or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port range
values separated with commas; for example,
show interfaces port—channel
1-2,7
. To enter any random number of ports, you can enter a comma-separated
string of port numbers, for example
show interfaces port-channel 1,7
NOTE: The port-range option is only available for 1 Gigabit Ethernet, 10-Gigabit
Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port Channel, and VLAN
interfaces.
The following describes the
show interfaces port-channel
command shown in
the following example.
Field Description
Port-Channel 1... Displays the LAG’s status. In the Example, the status of the LAG’s
LAG fate-sharing group (“Failover-group”) is listed.
Hardware is... Displays the interface’s hardware information and its assigned
MAC address.
Port-channel is
part... Indicates whether the LAG is part of a LAG fate-sharing group
(“Failover-group”).
Internet address... States whether an IP address is assigned to the interface. If an IP
address is assigned, that address is displayed.
MTU 1554... Displays link and IP MTU.
LineSpeed Displays the interface’s line speed. For a port channel interface,
it is the line speed of the interfaces in the port channel.
Members in this... Displays the interfaces belonging to this port channel.
ARP type:... Displays the ARP type and the ARP timeout value for the
interface.
Last clearing... Displays the time when the
show interfaces
counters were
cleared.
Queueing
strategy. States the packet queuing strategy. FIFO means first in first out.
packets input... Displays the number of packets and bytes into the interface.
Input 0 IP
packets... Displays the number of packets with IP headers, VLAN tagged
headers, and MPLS headers. The number of packets may not
add correctly because a VLAN tagged IP packet counts as both a
VLAN packet and an IP packet.
0 64-byte... Displays the size of packets and the number of those packets
entering that interface. This information is displayed over two
lines.
Received 0... Displays the type and number of errors or other specific packets
received. This information is displayed over three lines.
Interfaces 1026